产品中文名称: 等静压成型碳化硅石墨坩埚
产品英文名称:
Silicon carbide graphite crucible formed by isostatic pressing
产品类别: 辅料耗材
中文介绍: 等静压成型碳化硅石墨坩埚:选用高级耐火原材料,等静压坩埚成型设备及技术,具有:体积密度大、耐高温、传热快、耐酸碱侵蚀、高温强度大、抗氧化性能高等特点。使用寿命是粘土石墨坩埚的3-5倍。 本产品质量稳定,使用寿命长,大幅度降低了燃耗,降低了工人劳动强度,提高了工作效率,为用户创建了更好的经济效益。
配套炉型:可用于电阻炉,中频电炉,电磁感应炉,生物颗粒炉,燃气炉,焦炭炉,燃油炉,煤气发生炉等。
使用范围:熔炼各种金、银、铜、铝、锡、铅、锌等有色金属,及各种有色金属合金。
英文介绍: The largest isostatic cool crucible forming equipment and technology, which is using advanced refractory raw materials and high-tech formula to develop a new generation of high-quality silicon carbide crucible. This product has the characteristics of high volume density, high temperature resistance, fast heat, acid and alkali resistance, high temperature strength, and oxidation resistance. The service life is 3-5 times of the clay graphite crucible. The product has stable quality, long service life, greatly reduces the fuel consumption, reduces the labor intensity of workers, improves the work efficiency, and creates better economic benefits for users. Matching furnace type: It can be used for resistance furnace, intermediate frequency electric furnace, induction cooker, biological particle furnace, gas furnace, coke furnace, fuel furnace, gas generator, etc. Scope of use: smelting all kinds of gold, silver, copper, aluminum, tin, lead, zinc and other non-ferrous metals, and a variety of non-ferrous metal alloy.
坩埚的预热
1.坩埚属陶瓷制品,坩埚壁内存在一定数量的气孔,容易吸潮,所以**使用坩埚之前在不加料的条件下,坩埚必须进行预热以确保没有湿气残留在坩埚壁中:是放在有温度的炉边烘烤24小时以上,在这段时间内,坩埚要转动几次,使其均匀受热,去除坩埚壁内的潮气。以免坩埚升温太快,造成坩埚热膨胀,出现掉底、脱层或爆裂。
注:潮气一般在75~100度时蒸发的较快,所以在此温度时升温一定要慢;数小时后(视坩埚具体受潮情况适当延长100℃之内预热时间)坩埚预热至150~200度并保温一小时,之后每小时升温150度。由于在315~650度的温度范围内坩埚壁会出现快速氧化,氧化不仅会缩短坩埚的寿命,而且会由于热导率降低影响其使用性能,因此坩埚*在此温度区间内停留过久的时间。
2.坩埚经过**次预热后通常如连续使用*再次预热,除非坩埚再次暴露于潮湿的环境中。
3.坩埚预热后,操作人员需要在不加料的状态下快速升温到850~950度,并保温半小时,再降到正常的使用温度,然后加料。(加热坩埚使其温度**正常工作温度会延长坩埚的使用寿命。)通常使坩埚加热至815~930度,会有助于坩埚的釉料保护,如果有可能,这种高温加热可以每周都进行一次